RAINPOINT ICS006 | Frequently Asked Questions (FAQ) · 15 questions

Q1. What measurement modes does the ICS006 have?

A. The ICS006 provides four measurement modes: FLOW MODE, CONSUMPTION MODE, AVG MODE, and TOTAL MODE.

Q2. What does FLOW MODE show?

A. FLOW MODE displays the current real-time water flow in GAL/Min or L/Min.

Q3. What does CONSUMPTION MODE show?

A. CONSUMPTION MODE measures the water consumption of a single watering session. If there is no water flow for approximately 30 seconds, the displayed consumption resets.

Q4. What does AVG MODE show?

A. AVG MODE displays the daily average water consumption for the previous 7 days.

Q5. What does TOTAL MODE show?

A. TOTAL MODE displays the accumulated total water consumption since the last reset.

Q6. How do I switch between gallons and liters?

A. Go to FLOW MODE and press and hold the button for approximately 2 seconds.

Q7. How do I reset a measurement?

A. Open CONSUMPTION, AVG, or TOTAL MODE and press and hold the button for approximately 2 seconds. The selected measurement resets to zero.

Q8. Why does the screen turn off after a while?

A. The ICS006 has an energy-saving standby function. The display automatically turns off after more than approximately one minute without water flow or button operation.

Q9. What battery does the ICS006 use?

A. The ICS006 uses 1 × CR2032 battery. The battery is included with the product.

Q10. Does the ICS006 require an app?

A. No. The current ICS006 manual does not describe app operation. All measurements are viewed directly on the LCD display.

Q11. Does the ICS006 require Wi-Fi or a Gateway?

A. No. No Wi-Fi or Gateway setup is described for the ICS006.

Q12. Does installation direction matter?

A. Yes. Water must flow through the ICS006 in the direction indicated in the installation diagram. Incorrect direction may affect measurement accuracy.

Q13. Can I separate all of the connector parts?

A. No. The manual specifically states that fittings 2, 3, and 4 should remain together.

Q14. Can the ICS006 be used with both US and EU faucets?

A. The package includes USA- and EU-type thread components. Use the correct configuration for the faucet and do not interchange the fitting sequence.

Q15. What is the measurement accuracy?

A. The specified measurement tolerance is ±5%.