If the IK153 does not operate as expected during installation or everyday use, the information below outlines common conditions and practical solutions.
These conditions are usually related to water supply, tubing installation, battery status, or watering settings.
Condition 1: Device does not water
Possible Causes
- Water shortage at inlet.
- Pump powered off unexpectedly.
- Watering schedule cleared.
What to Do
- Check the water container.
- Confirm sufficient water supply.
- Turn the dial to ON.
- Reset the watering schedule if needed.
Condition 2: Uneven water flow
Possible Causes
- Water container is too far from plants.
- Tubing is too long.
- Pump efficiency is reduced.
What to Do
- Move plants closer.
- Shorten tubing if possible.
- Check tubing connections.
- Ensure the irrigation layout is suitable.
Condition 3: Tubing is difficult to insert
Possible Cause
The tubing material is designed for durability.
What to Do
- Put tubing end into hot water for 10 seconds.
- Apply a small amount of vegetable oil.
- Connect tubing again.
Condition 4: Low battery appears
Possible Cause
Battery power is insufficient.
What to Do
Recharge the pump using: Type-C cable + DC 5V/1A adapter
Condition 5: Water shortage alert appears
Possible Cause
The pump detects insufficient water.
What to Do
- Check the water container.
- Refill water.
- Make sure the inlet can draw water correctly.
The low-water icon remains until water is detected at the next pump start.
Condition 6: Watering schedule does not work
Possible Causes
- Device is in OFF mode.
- Schedule settings are incorrect.
- Rain Delay is active.
What to Do
- Turn dial to ON.
- Check start time.
- Check watering frequency.
- Cancel Rain Delay if needed.
Frequently Asked Questions (FAQ) · 7 questions
Related Articles
RAINPOINT IK153 – Overview & Getting Started
RAINPOINT IK153 – How to Identify Your Version
Comments
Please sign in to leave a comment.