This article provides an overview of the RAINPOINT HTP159W Wi-Fi Automatic Indoor Watering Pump Kit and helps you get started correctly.
If the label on your device shows HTP159W, you’re in the right place.
What Is the HTP159W?
The HTP159W is a Wi-Fi automatic indoor watering pump kit designed for plant watering with a water container and drip tubing.
It pumps water from the container through the tubing and delivers it to plants automatically based on the watering plans set in the app.
It is intended for indoor plant watering and should be used with clean, cold water only.
Key Capabilities
The HTP159W supports the following basic functions:
- App-based watering plans
- Manual watering
- Normal Irrigation and Cycle & Soak modes
- Rain Delay settings: 24, 48, or 72 hours
- Seasonal Adjustment
- Water shortage alert
- Watering record and device status view in the app
Before You Start
Before installation and use, please make sure:
- The pump is fully charged
- The tubing is fully inserted into the IN and OUT ports
- The pump is placed higher than the water source
- Only clean, cold water is used
- The anti-siphon valve is installed in the correct water flow direction
- A quick pre-use test is completed before normal use
Related Articles
RAINPOINT ITV105-M147 | 1-Zone – How to Identify Your Version
RAINPOINT ITV105-M147 | 1-Zone – Common Issues & Fixes
RAINPOINT ITV105-M147 | 1-Zone – Specifications & Compatibility
Comments
Please sign in to leave a comment.