Articles in this section

RAINPOINT 1008 – Common Questions, Care & Safety

This article answers common operating questions and provides care, storage, and safety guidance for the RAINPOINT 1008 Hose Nozzle.


Water leaks between the nozzle and garden hose

Possible Cause

The hose-to-nozzle connection may not be completely sealed.

What to Do

  1. Turn off the water supply.
  2. Disconnect the hose.
  3. Check the rubber washer.
  4. Add a rubber washer if necessary.
  5. Reconnect and tighten the hose securely.
  6. Turn the water back on and check the connection again.


Frequently Asked Questions

How many spray patterns does the 1008 have?

The 1008 provides 10 spray patterns:

FULL, VERTICAL, SHOWER, STREAM, FLAT, MIST, JET, CENTER, ANGLE, and CONE.

How do I change the spray pattern?

Rotate the spray head until the desired pattern is selected.

How do I adjust the water flow?

Use the integrated flow control and adjust it between: OFF and Maximum

What size garden hose connection does the 1008 use?

The water inlet uses a: 3/4" thread

What is the maximum working pressure?

116 PSI (8 bar)

Do not operate the nozzle above this pressure.

What is the 1008 made of?

The manual specifies:

  • Plastic body
  • TPR coverage
  • ABS nozzle
  • Aluminum alloy threaded interface

Does the 1008 include a rubber washer?

Yes.

A built-in rubber washer is shown in the product overview.

What should I do if the hose connection leaks?

Check the washer and add a rubber washer before reconnecting the hose if necessary.

Can the 1008 be used with hot water?

No.

The manual advises against hot-water applications.

Can I use pesticides or chemicals with the 1008?

No.

The 1008 is intended for clean water only.

Do not use:

  • Pesticides
  • Car-wash foaming agents
  • Other chemicals

Can I drink water from a garden hose connected to the 1008?

No.

The manual warns that water from a garden hose may become contaminated and should not be consumed.

Is the 1008 suitable for commercial or high-pressure use?

No.

It is intended for general outdoor use at: 116 PSI or less


Care & Storage

Turn Off the Water After Use

Do not leave the product unattended while it is operating.

Turn off the water supply when watering is complete.

Freezing or Extremely Hot Weather

During freezing or extremely hot weather:

  1. Disconnect the hose and nozzle from the water source.
  2. Remove the product from outdoor exposure.
  3. Store it indoors.

This helps reduce the risk of temperature-related damage.


Safety

Clean Water Only

Do not use pesticides, detergents, foaming agents, or other chemical products.

Keep Away from Children

The product is not a toy.

Keep it out of reach of children.

Do Not Direct High-Pressure Water at People, Pets, or Fragile Objects

High-pressure spray may cause injury or property damage.

Do Not Exceed the Pressure Limit

Maximum working pressure: 116 PSI / 8 bar


Related Articles

RAINPOINT 1008 – Overview & Specifications

RAINPOINT 1008 – Installation & Use

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

More Resources