If the RAINPOINT 1091 does not operate as expected, the following checks cover the common conditions described in the user manual.
Condition 1: Water leaks between the nozzle and garden hose
Possible Cause
The connection may be loose or incompletely sealed.
What to Do
- Turn off the water.
- Disconnect the hose from the nozzle.
- Check the existing rubber washer.
- Add an additional rubber washer if necessary.
- Reconnect the hose.
- Tighten the connection securely.
- Turn the water back on and check again.
The manual allows two rubber washers to be used together when additional sealing is required.
Condition 2: Water leaks around the spray head
Possible Causes
- The Phillips screw may be loose.
- The spray head may not be fully rotated into the locked spray position.
What to Do
Check the Phillips Screw
Tighten it using a Phillips screwdriver.
Check the Spray Head
Rotate the spray head until it reaches the selected spray position and you hear a: “click”
This indicates that the spray head has reached the locked position.
Frequently Asked Questions
How many spray patterns does the 1091 have?
The 1091 provides 10 spray patterns:
SHOWER, STREAM, FLAT, MIST, JET, CENTER, ANGLE, CONE, FULL, and VERTICAL.
How do I change the spray pattern?
Rotate the spray head to the desired pattern.
Make sure it reaches the locked position before use.
How do I adjust the water flow?
Use the flow-control adjustment and rotate it between: OFF and Maximum
What size garden hose connection does the 1091 use?
The water inlet uses a: 3/4" thread
What is the maximum working pressure?
116 PSI
Do not operate the nozzle above this pressure.
What should I do if water leaks between the hose and nozzle?
Check the rubber washer and add an additional washer if needed.
The manual states that two rubber washers may be used together.
Why does water leak around the spray head?
Check whether:
- The Phillips screw is loose, or
- The spray head has not fully reached its locked position.
Can the 1091 be used with hot water?
No.
The manual advises against hot-water applications.
Can I use pesticides or other chemicals with the 1091?
No.
The 1091 is intended for clean water only.
Do not use:
- Pesticides
- Car-wash foaming agents
- Other chemicals
These products may cause corrosion or damage.
Can I drink water from a garden hose connected to the 1091?
No.
The manual warns that water from any garden hose may become contaminated and should not be consumed.
Is the 1091 suitable for commercial or high-pressure use?
No.
The manual specifies general outdoor use at 116 PSI or less and advises against commercial and high-pressure applications.
Care & Storage
Turn Off the Water After Use
Do not leave the nozzle unattended while the water is running.
Turn off the water supply after use.
Freezing or Extremely Hot Weather
During freezing or extremely hot weather:
- Disconnect the hose and nozzle.
- Remove them from the water source.
- Store the nozzle indoors.
This helps reduce the risk of temperature-related damage.
Safety
Use Clean Water Only
Do not use chemical products through the nozzle.
Keep Away from Children
The nozzle is not a toy.
Keep it out of reach of children.
Do Not Aim High-Pressure Water at People, Pets, or Fragile Objects
High-pressure spray may cause personal injury or property damage.
Do Not Exceed 116 PSI
Use only within the pressure limit specified by the manual.
Comments
Please sign in to leave a comment.