This article provides an overview of the RAINPOINT 1091 Hose Nozzle, including its 10 spray patterns, flow adjustment, construction, connection size, and operating pressure.
If the model number on your product is 1091, you are viewing the correct support page.
What is the RAINPOINT 1091?
The RAINPOINT 1091 Hose Nozzle is a 10-pattern garden spray nozzle designed for general outdoor clean-water use.
The rotating spray head provides different spray patterns, while the flow-control adjustment allows the water output to be adjusted from:
OFF → Maximum
The nozzle connects to a compatible garden hose through a 3/4" threaded water inlet.
Key Features
- 10 selectable spray patterns
- Adjustable water flow from OFF to Maximum
- Zinc alloy body
- TPR-covered grip
- ABS spray nozzle
- Built-in rubber washer
- 3/4" threaded water inlet
- Maximum working pressure of 116 PSI
- Designed for general outdoor clean-water use
10 Spray Patterns
The 1091 provides the following spray modes:
- SHOWER
- STREAM
- FLAT
- MIST
- JET
- CENTER
- ANGLE
- CONE
- FULL
- VERTICAL
Rotate the spray head to select the desired pattern.
Make sure the spray head is fully rotated into the selected position before use.
Product Specifications
| Parameter | Value |
|---|---|
| Model | 1091 |
| Product Type | 10-Pattern Hose Nozzle |
| Spray Patterns | 10 |
| Maximum Working Pressure | 116 PSI |
| Water Inlet | 3/4" thread |
| Body Material | Zinc alloy |
| Body Coverage | TPR |
| Nozzle Material | ABS |
| Built-in Rubber Washer | Yes |
| Flow Adjustment | OFF to Maximum |
| Intended Use | General outdoor clean-water spraying |
Important Use Limitations
The 1091 is intended for clean water only.
Do not use it for:
- Commercial applications
- Hot-water applications
- High-pressure applications above the specified limit
- Pesticides
- Car-wash foaming agents
- Other chemicals
The manual warns that chemicals may cause corrosion or damage to the product.
Comments
Please sign in to leave a comment.