This article provides an overview of the RAINPOINT JS-DIS101 Drip Irrigation System, including its main components, specifications, and available kit sizes.
If the model number on your product is JS-DIS101, you are viewing the correct support page.
What is the JS-DIS101?
The RAINPOINT JS-DIS101 Drip Irrigation System is a customizable garden watering kit designed for distributing water to multiple plants through a network of tubing, three-way sockets, and adjustable shower heads.
The tubing can be cut to the required length and arranged according to the watering area.
Each adjustable shower head can be rotated to switch between:
- Water Column Mode
- Spray Mode
The system is suitable for customized garden irrigation layouts where individual spray points can be positioned and adjusted as needed.
Key Features
- DIY irrigation layout
- 25FT / 50FT / 100FT kit options
- Adjustable 360° shower heads
- Water Column Mode
- Spray Mode
- Push-fit three-way sockets
- Quick tube installation and removal
- Included tube cutter
- Included pipe clamps and ribbons for securing tubing
- Built-in filter in the quick connector
- 3/4" faucet connection
- Recommended water pressure: 40–60 PSI
Product Specifications
| Parameter | Value |
|---|---|
| Model | JS-DIS101 |
| Product Type | Drip Irrigation System |
| Material | PE + Metal + POM + Nylon + PP |
| Water Inlet | 3/4" faucet |
| Nozzle Type | Adjustable 360° |
| Tube Outside Diameter | 8 mm (0.31 in) |
| Tube Inside Diameter | 5.6 mm (0.22 in) |
| Recommended Water Pressure | 40–60 PSI |
| Spray Modes | Water Column / Spray |
Package Contents
Package quantities vary by hose length.
| Component | 100FT | 50FT | 25FT |
|---|---|---|---|
| Quick Connector | 3 | 2 | 1 |
| Pipe Clamp | 40 | 20 | 20 |
| Three-way Socket | 30 | 15 | 7 |
| Shower Head | 30 | 15 | 7 |
| Ribbon | 40 | 20 | 20 |
| End Plug | 4 | 2 | 2 |
| Tube Cutter | 1 | 1 | 1 |
| Thread Seal Tape | 1 | 1 | 1 |
| Filter Screen | 3 | 2 | 1 |
| Rubber Washer | 3 | 2 | 2 |
Main Components
Three-Way Socket
Connects the main tubing and shower head.
The socket uses a push-fit design, allowing the tubing to be installed without heating or special tools.
Adjustable Shower Head
The shower head can be rotated to adjust the watering pattern between Water Column Mode and Spray Mode.
Quick Connector
Connects the irrigation system to the water source.
A filter is pre-installed inside the quick connector.
End Plug
Closes the final three-way socket at the end of the irrigation line.
Comments
Please sign in to leave a comment.