This article provides an overview of the RAINPOINT HL1202 Garden Soaker Hose, including its main components, operating pressure, materials, and recommended applications.
If the model number on your product is HL1202, you are viewing the correct support page.
What is the HL1202?
The RAINPOINT HL1202 Garden Soaker Hose is designed to deliver water directly to the soil through evenly distributed outlet holes along the hose.
It is suitable for slow, targeted watering around:
- Garden beds
- Flower beds
- Vegetable patches
- Rows of plants
- Other landscaped planting areas
By placing the hose near plant roots, water can be delivered directly to the growing area while reducing unnecessary surface watering.
Product Features
- Porous watering design for direct soil irrigation
- Flexible layout around plants and garden beds
- 360° swivel inlet
- 360° swivel connector handle
- 3/4-inch aluminum inlet and outlet connectors
- Oxford fabric outer cover
- Six-hole pressure-relief gasket
- 3/4-inch flat rubber washers
- Removable end cap
- Compatible with additional soaker hose sections when installed correctly
Included Connection Parts
Six-Hole Pressure-Relief Gasket
The six-hole gasket is installed at the water-source end of the hose.
It helps:
- Reduce incoming water pressure
- Filter larger impurities
- Support more controlled seepage along the hose
3/4-Inch Flat Rubber Washer
The flat rubber washer is used:
- At the end-cap connection
- Between two connected soaker hoses
It helps seal the connection and reduce leakage.
End Cap
The end cap closes the end of the watering line.
Make sure the end cap is securely tightened before use.
Product Specifications
| Parameter | Value |
|---|---|
| Model | HL1202 |
| Product Type | Garden Soaker Hose |
| Hose Inner Diameter | 1/2 inch |
| Hole Spacing – 50 ft and Above | 20 cm |
| Hole Spacing – 49 ft and Below | 12 cm |
| Recommended Working Pressure | 40–60 psi |
| Inlet & Outlet | 3/4-inch aluminum hose connectors |
| Inner Tube | Rubber-plastic material |
| Outer Cover | 400 × 800D Oxford fabric |
| Watering Method | Water released through distributed hose openings |
| Recommended Placement | On the soil surface |
| Maximum Continuous Soaker-Hose Length | 100 ft |
Suitable Watering Setups
The HL1202 can be connected directly to a faucet or used with compatible garden-watering equipment, such as a hose timer or standard garden hose.
A typical setup is:
Faucet → Optional Timer → HL1202 Soaker Hose → End Cap
Multiple planting areas may be connected with standard garden hose sections and compatible fittings, provided that the continuous length of soaker hose does not exceed 100 ft.
Comments
Please sign in to leave a comment.