Regular care helps maintain reliable operation of the RAINPOINT ITV256 2-Zone Digital Water Timer and may help extend its service life.
Cleaning the Inlet Filter
The inlet filter helps prevent dirt and debris from entering the timer, reducing the risk of blockages and restricted water flow.
How to clean the filter:
- Turn off the garden faucet and disconnect the timer.
- Remove the filter from the water inlet.
- Rinse the filter thoroughly under clean running water.
- Reinstall the filter correctly before reconnecting the timer.
Maintenance tip:
Check and clean the inlet filter regularly, especially when dirt or sediment is present in the water supply or when water flow becomes weaker.
Winter Storage
- The ITV256 should not be used in freezing conditions.
- Remove the timer when temperatures fall below 37.4°F (3°C).
- Drain any remaining water from the timer.
- Store the timer indoors in a dry location.
- Keep the timer away from freezing temperatures during storage.
Exposure to freezing conditions may damage the internal components. The specified operating temperature range for the ITV256 is 37.4°F–122°F (3°C–50°C).
Long-Term Storage
If the timer will not be used for an extended period:
- Remove the batteries before storage.
- Drain any remaining water from the timer.
- Store the timer indoors in a dry environment.
- Before using the timer again, install 2 new AA alkaline batteries and make sure the battery compartment is securely closed.
After a long period of inactivity, activate the timer before normal operation. Use Manual Wateringto open and close the valves several times and confirm that both Zone 1 and Zone 2 operate properly.
General Care Tips
To help maintain proper operation:
- Tighten all connections by hand only and do not use tools.
- Avoid overtightening the inlet and outlet connections.
- Use clean, cold water only.
- Keep the inlet filter clean and properly installed.
- Replace the batteries when the low-battery indicator appears.
- Keep the battery compartment dry when replacing batteries.
- Install the timer in a sheltered outdoor location when possible.
- Do not immerse the timer in water or expose it to extreme force or impact.
- Check both watering zones periodically to make sure the valves open and close normally.
When to Check Other Help Articles
- If either zone does not start or stop watering as expected, refer to Common Issues & Fixes.
- For information about water pressure, watering duration, operating temperature, waterproof level, and other requirements, see Specifications & Compatibility.
If the issue continues after maintenance and troubleshooting, please contact RAINPOINT Supportfor further assistance.
Contact information:
US Hotline: +1 833-381-5659
DE Hotline: +49 800-182-0576
UK Hotline: +44 20-4628-3036
Email: service@rainpoint.com
Related Articles
RAINPOINT ITV256 | 2-Zone – Overview & Getting Started
RAINPOINT ITV256 | 2-Zone – How to Identify Your Version
Comments
Please sign in to leave a comment.