This article answers common operating questions and provides care, temperature, pressure, and safety guidance for the RAINPOINT MZ256 Heavy Duty Multi Nozzle.
Frequently Asked Questions
How many spray patterns does the MZ256 have?
The MZ256 provides 9 spray patterns:
JET, FULL, SOAKER, ANGLE, FLAT, VERTICAL, MIST, SHOWER, and CONE.
How do I change the spray pattern?
Rotate the nozzle head until the desired spray pattern is selected.
What size garden hose connection does the MZ256 use?
The water inlet uses a: 3/4" thread
Does the MZ256 include a rubber washer?
Yes.
The product overview shows a built-in rubber washer at the hose connection.
What is the standard working pressure?
60 PSI (4.1 bar)
What is the maximum working pressure?
80 PSI (5.5 bar)
Do not operate the nozzle above this pressure.
What is the MZ256 made of?
The manual specifies:
- Zinc alloy body
- TPR handle
- ABS nozzle
Does the MZ256 have a trigger lock?
Yes.
The product overview identifies a Lock Bar Trigger.
Can the MZ256 be used indoors?
No.
The manual states: Intended for outdoor use only.
Can I use hot water with the MZ256?
Do not use water hotter than: 115°F (46°C)
Can I use the MZ256 in freezing temperatures?
The manual states: Do not use below 40°F (4°C).
What should I do before freezing weather?
Drain the remaining water from the nozzle and store it indoors away from freezing temperatures.
Care & Storage
Drain Water After Use in Cold Weather
Before freezing conditions:
- Disconnect the nozzle from the hose.
- Drain remaining water completely.
- Store the product indoors.
This helps reduce freeze-related damage.
Keep the Hose Connection Clean
Check the threaded inlet and built-in washer before reconnecting the nozzle.
Remove visible dirt or debris if necessary.
Do Not Exceed the Pressure Limit
Maximum: 80 PSI / 5.5 bar
Higher pressure may increase the risk of product damage.
Observe the Temperature Limits
Do not use:
- Above 115°F / 46°C water temperature
- Below 40°F / 4°C ambient operating temperature
Safety
Outdoor Use Only
The MZ256 is intended for outdoor use.
Electrical Shock Hazard
Do not spray water into:
- Electrical outlets
- Electrical equipment
- Sources of electrical current
The manual warns that doing so may result in severe electrical shock.
Keep Away from Freezing Conditions
Drain and store the nozzle indoors when freezing temperatures are expected.
Follow the Pressure Limit
Do not exceed 80 PSI.
Warranty
RainPoint provides a 5-year limited warranty against manufacturing defects in materials and workmanship.
Comments
Please sign in to leave a comment.