If the ITP106 does not operate as expected during installation or everyday use, the information below outlines common conditions and practical solutions.
These situations are usually related to water supply, tubing installation, power supply, or watering settings.
Condition 1: No water output
Possible Causes
- Water shortage at the inlet.
- Filter is not correctly positioned.
- Tubing connection is incorrect.
- Pump has lost power.
What to Do
- Check the water level in the container.
- Make sure the filter is inside the water source.
- Check inlet and outlet tubing connections.
- Check battery or USB power status.
- Restart the pump.
Condition 2: Uneven water flow
Possible Causes
- Pump is too far from plants.
- Tubing is too long.
- Water resistance is too high.
What to Do
- Shorten unnecessary tubing.
- Move plants closer to the pump.
- Adjust switch valves.
- Check tubing layout.
Condition 3: Watering schedule does not run on time
Possible Causes
- Water shortage.
- Power interruption.
- Schedule was cleared.
What to Do
- Check water level.
- Check battery status.
- Reconfigure watering schedule.
Condition 4: Tubing is difficult to connect
Possible Cause
The tubing material is designed for durability.
What to Do
- Soak tubing end in hot water for about 10 seconds.
- Apply a small amount of vegetable oil.
- Reconnect the tubing.
Condition 5: Low water alarm appears
Possible Cause
The pump detects insufficient water supply.
What to Do
- Refill the water container.
- Check the filter.
- Confirm inlet tubing position.
Condition 6: Low battery alarm appears
Possible Cause
Battery power is insufficient.
What to Do
- Replace all 4 AA alkaline batteries.
- Or connect USB power.
Frequently Asked Questions (FAQ) · 7 questions
Related Articles
RAINPOINT ITP106 – Overview & Getting Started
RAINPOINT ITP106 – How to Identify Your Version
Comments
Please sign in to leave a comment.